Marine Varnish

Description

Glossy, satin or matt, this varnish based on alkyd resins absorbs UV.

 

Avantages:

Particularly resistant to the weather in the mountains or at sea, this Marine Varnish is the ideal product for all varnishing of indoor and outdoor furniture. Very resistant inside, it is ideal for any surface requiring a great superficial hardness.

 

Application:

Before applying it on new wood, sand and clean the surface before applying a layer diluted to 5-10. Leave to dry for 6 hours. Sand the surface again with 400 grit sandpaper before applying a second coat, this time undiluted.

For damaged bottoms, thoroughly clean and seal the slots with wood pulp. Proceed in the same way as for new wood.

Drying time without dust: 5 hours.

Drying time between two layers: 6 hours.

Mix well before use to make the product homogeneous.

The product can be applied with a brush, a yellow striped roller or a spray gun.

Thoroughly clean the equipment with White Spirit after use.

 

Caution:

Store in a well-ventilated area, out of direct sunlight and away from heat. DO NOT SMOKE nearby: HIGHLY FLAMMABLE. Close the containers carefully.

If Marine Varnish does not present a physical hazard, repeated exposure to the product may nevertheless cause drying of the skin or cracks. Not harmful to the environment, there is no link between the use of this mixture under normal conditions and any damage to the environment.

In case of contact with the eyes:

Rinse thoroughly with clear water, keeping your eyes open for about 15 minutes. If contact lenses are present, remove immediately if possible before continuing rinsing.

For added efficiency, let the water flow from the nose to the ears and avoid splashing in the other eye.

 

Pack Sizes: 1L, 2.5L, 5L

Contact us for MSDS >