VIP

Latex based acrylic paint for ceilings and walls
Are you looking for a smooth and sleek finish for your ceiling and walls? VIP is the paint for you.

Category:

Description

With its eggshell finish, this latex-based coating is ideal for interior surfaces following the latest fashions.

 

Usage:

Make sure that the surface to be painted is dry, without any trace of greasy substances or dust. If necessary, sand the surface to remove all traces of the previous coating.

 

Avantages:

Effective and odourless, this paint is easy to clean and has a very low impact on the environment.

 

Application:

Before use, remove peeling paint and any impurities or dirt present on the surface to be painted.

Mix the paint adequately.

Apply the paint with a brush or roller.

Allow to dry for one hour and wash equipment to remove any remaining paint.

Coating that does not require dilution. Mix well before use. At a temperature of 10 ° C to 30 ° C, apply with the tool chosen (brush, roller or spray gun) a first coat of paint as a primer. A minimum of two additional layers should be sufficient depending on the degree of porosity.

After use, remove excess paint from used equipment before washing directly with warm, soapy water.

Drying time: 1 hour

Recovery time: 12 hours

Yield: 10-12 m² / liter

Store in a dry place at a temperature of 5 ° C to 30 ° C. Protect against frost.

 

Caution:

It is advisable to wear goggles, gloves and proper clothing when handling. There is a risk of irritation if the paint accidentally comes into contact with the eyes. Keep out of reach of children.

IN CASE OF CONTACT: Contains a small percentage of aminomethyl propanol. If the product has been ingested, DO NOT VOMITING and consult a doctor immediately.

In case of contact with the eyes, rinse thoroughly with clear water.

 

Pack Sizes: 1L, 2.5L, 5L, 20L

Contact us for MSDS >

Additional information

Features

Finishes

Types

,

Surfaces

, ,

Reviews

There are no reviews yet.

Be the first to review “VIP”

Your email address will not be published. Required fields are marked *

Go to Top