Inatanche

Description

With a high-quality pure acrylic resin, this microporous elastomeric coating in aqueous dispersion guarantees optimal waterproofing of any cracked facade and surface crosslinking.

Usage:

For the surface to be water-repellent, it must be absolutely dry, clean, healthy and free of all remains of old organic coatings. If the concrete has been ruptured by reinforcement corrosion, it is also important to repair it and wash dirty or powdery bottoms with a high-pressure cleaner.

Avantages:

A long life and durable paint for walls and ceilings

Application:

Coating that does not require dilution. For best results, Inatanche should be applied by brush or roller. It is necessary to use a special wafer panel (18 mm) to spread 250 to 350g of product per square meter or 320 to 450g per square meter. Apply the product generously in crossed layers. Remove excess paint from equipment before washing with warm, soapy water immediately after use

For quality work, never apply the product in rainy or foggy weather. Do not apply to wet, frozen, frosted, or directly exposed surfaces.

If the temperature is below 5 ° C or above 35 ° C, or if the humidity (humidity level of the atmosphere) is above 80% relative humidity, do not apply it to the chosen surface.

Before use, remove peeling paint and any impurities or dirt present on the surface to be painted.

Mix the paint adequately.

Apply the paint with a brush or roller.

Allow to dry for one hour and wash equipment to remove any remaining paint.

Pack Sizes: 1L, 2.5L, 5L, 20L

Contact us for MSDS >