Matt Emulsion/True White

A great paint for interior use.
Looking for an all round wall and ceiling paint? Matt Emulsion is for you.



With a semi-gloss finish, this styrene-acrylic emulsion coating is flexible and strong.



Ensure that the surface to be painted is dry, clean and free of impurities such as pollutants, paint chips or efflorescence. Seal cracks with mortar or putty before use. For new surfaces, use a preparation layer of the TintEX Binder or Inatanche Sealer type.



Low odor and splash free, this paint is easy to apply and clean and adheres particularly well to floury surfaces.



Mix well before use. Using a brush, roller or spray gun, apply one to two coats at a temperature of 10 ° C to 30 ° C. If the surface has already been primed, two layers should suffice. Remove excess paint from equipment before washing with warm, soapy water immediately after use.

Drying time: 1 hour

Recovery time: 1-2 hours

Yield: 8-9 m² / liter

Before use, remove peeling paint and any impurities or dirt present on the surface to be painted.

Mix the paint adequately.

Apply the paint with a brush or roller.

Allow to dry for one hour and wash equipment to remove any remaining paint.

Store in a dry place at a temperature of 5 ° C to 30 ° C. Protect against frost.



It is advisable to wear goggles, gloves and proper clothing when handling. There is a risk of irritation if the paint accidentally comes into contact with the eyes. Keep out of reach of children.

IN CASE OF CONTACT: Contains a small percentage of aminomethyl propanol. If the product has been ingested, DO NOT VOMITING and consult a doctor immediately.

In case of contact with the eyes, rinse thoroughly with clear water.


Pack Sizes: 1L, 2.5L, 5L, 20L

Contact us for MSDS >

Additional information




, ,




There are no reviews yet.

Be the first to review “Matt Emulsion/True White”

Your email address will not be published. Required fields are marked *

Go to Top